How To Setup LiteMage Cache

    Posted in Magento Hosting on Nov 04, 2018

    How To Setup LiteMage Cache

    LiteMage Cache is the world's fastest Magento Full Page Cache.

    LiteMage Cache uses the LiteMage Magento Extension and an improved version of LiteSpeed Cache to deliver superior caching with ESI implementation geared specifically for Magento.

    This article will guide you through the all steps needed set up LiteMage Cache in our Web Hosting or Managed Cloud Server*.

    • To enable LiteMage Cache if you are on our Managed/Dedicated Cloud Server, please contact our Billing Department (it's Free).

    IMPORTANT NOTES:-

    • The steps below are applicable for Magento 1.x. Please ...

    [Read more...]

    configure spam expert in cPanel/WHM IP-based Authentication

    Posted in Whm/Cpanel on Nov 04, 2018

    Navigate to "Exim Configuration Editor" in WHM.

    Choose "Advanced Editor". Add the following in "Section: POSTMAILCOUNT" (chaning SMARTHOST to your SMTP hostname)

    smarthost_dkim:
    driver = manualroute
    domains = !+local_domains
    require_files = "+/var/cpanel/domain_keys/private/${sender_address_domain}"
    # Exclude null sender messages from relaying via the smarthost
    condition = ${if or {{!eq{$sender_address}{}} {!eq{$sender_host_address}{}}}} 
    transport = remote_smtp_smart_dkim
    route_list = $domain SMARTHOST::587
    
    smarthost_regular:
    driver = manualroute
    domains = !+local_domains
    # Exclude null se...
    [Read more...]

    How to Set or Change Hostname in CentOS 7

    Posted on Oct 31, 2018

    to change or set a CentOS 7 machine hostname, use the hostnamectl

    hostnamectl set-hostname your-new-hostname

    hostname command you can also use hostnamectl command to display a Linux machine hostname

    hostnamectl

    New hostname, a system reboot is required, issue one of the below commands in order to reboot a CentOS 7 machine

    init 6
    systemctl reboot
    shutdown -r
    [Read more...]

    How to extend the volume size on ec2 instance aws

    Posted in EC2-Hosting, Linux Servers on Oct 30, 2018

    1. Confirm the kernel. ~]# uname -r

    2.6.32-431.29.2.el6.x86_64

    1. Confirm the initial allocated size

    ]# df -h Filesystem Size Used Avail Use% Mounted on

    /dev/xvda1 7.9G 797M 6.7G 11% /

    tmpfs 498M 0 498M 0% /dev/shm

    lsblk

    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT xvda 202:0 0 15G 0 disk └─xvda1 202:1 0 8G 0 part /

    1. Install EPEL6 Repo ~]# wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm ~]# rpm -ivh epel-release-6-8.noarch.rpm

    2. Install the dracut & cloud-utils growpart modules-growroot ~]# yum install -y dracut-modules-growroot cloud-utils-growpart

    3. The initrd ...

    [Read more...]

    Check Apache concurrent Connections using Netstat command

    Posted in Linux Servers on Oct 12, 2018

    When your server is hitting high & overload, you might want to check, how many active connections are there and which IP take maximum of hit/connection from apache.

    To Count Apache concurrent connection’s, use any of the below commands.

    netstat -nt | grep :80 | wc -l
    
    netstat -plan|grep :80 | wc -l
    
    netstat -an | grep 'EST' | wc -l
    
    netstat -ant | grep ESTABLISHED | grep :80 | wc -l
    
    ps -A | grep httpd | wc -l
    
    ps -ef | grep http | wc -l
    
    ps aux | grep httpd | wc -l
    
    ps aux | grep http | grep -v "\(root\|grep\)" | wc -l

    To print the active Internet connections to the server at port 80 and sort...[Read more...]

    How to sync the data from one server to another server via ssh

    Posted in Linux Servers on Oct 11, 2018

    Sync the data from one server to another server using rsync on linux server.

    Rsync is one of common ways to copy files and folders between two servers, whether the servers are local or remote.

    Login to the server via ssh OR putty Gen windows application.

    ssh root@oldserverIP 
    
    rsync -ravP /home/user/file_name root@xx.xx.xx.xx:/home/user/d

    Here first refers the source path from where you are syncing the file

    and xx.xx.xx.xx refers destination server IP and the destination path where you would like to save the data.

    Please check the following usefull rsync variables :

    -v : Verbose
    
    -a : archive...
    [Read more...]

    How to change the hostname of your linux virtual nodes india

    Posted in Linux Servers on Oct 11, 2018

    Change Virtual Compute Nodes Hostname

    Please follow the below steps to change the hostname of your Virtual Compute Node.

    Login to your Virtual Compute Node as a root user.

    To check the current hostname of your server, run the command

    hostname

    To change the hostname of your server, type new name followed by hostname

    hostname new-name

    Change the hostname under the path /etc/sysconfig/network

    vi /etc/sysconfig/network

    Edit the content of the file so that it looks like this

    HOSTNAME=new-name

    Ubuntu/Debian

    Next, edit the /etc/hostname file and update hostname:

    vi /etc/hostname

    Edit the /etc/hosts f...[Read more...]

    How to Fix client intended to send too large body

    Posted in Linux Servers on Aug 24, 2018

    First you need to edit the /etc/nginx/nginx.conf file by typing the vi command:

    $ sudo vi /etc/nginx/nginx.conf

    In http (server/location) section add the following directive to set the

    maximum allowed size in 10MB:
    
    client_max_body_size 10M;

    Save and close the file.

    Test nginx configuration for error

    Run the following command:

    $ sudo nginx -t

    Sample outputs:

    nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
    nginx: configuration file /etc/nginx/nginx.conf test is successful

    If no error means, restart the nginx web server.

    $ sudo systemctl reload nginx
    
    OR
    
    $ sudo service nginx re...
    [Read more...]

    How to change the location for virtual hosts in Plesk for Windows Server

    Posted in Windows Plesk Control Panel on Aug 16, 2018

    Connect to a Plesk server via RDP.

    Launch Plesk Reconfigurator at Windows Start > All Programs > Plesk.

    In Plesk Reconfigurator, select Change Virtual Hosts location.

    host.PNG

    Specify the new location for virtual hosts and click Next. All existing virtual hosts data will be transferred to the new location as well.

    vhostslocation.PNG

    [Read more...]

    How to change the mailaccount location in Plesk for Windows Server

    Posted in Windows Plesk Control Panel on Aug 14, 2018

    Connect to a Plesk server via RDP.

    Launch Plesk Reconfigurator at Windows Start > All Programs > Plesk.

    In Plesk Reconfigurator, select Change Plesk Mail Data location.

    maillocation.PNG

    Specify the new location for Plesk mail data and click Next. All existing mail data will be transferred to the new location as well.

    mail.PNG

    [Read more...]